- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 SDRAM (32-bit data bus)(HPS)
- Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
- MAX 10 10M50DAF484C7G Device
- Accelerometer and 4-bit Resistor VGA
- 64MB SDRAM, x16 bits data bus
- Arduino UNO R3 and 2x20 GPIO connector
- On-Board USB Blaster (Normal type B USB)
- Cyclone II EP2C20F484 with ~20,000 LEs
- 8MB SDRAM, 512K SRAM, and 4MB Flash
- Audio/Video interface, RS232, and SD card
- Also known as Cyclone II Starter Kit
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
- HPS: DDR3, USB Host, MicroSD Socket, Ethernet, Accelerometer, UART-to-USB, LTC Header
- Support Linux BSP and openCL BSP
- DE2-70 / DE2 / DE1 + LTM + D5M
- DE2 + DC2 +LCM
- Intel Stratix 10 GX/SX FPGA
- Four QSFP28(100GbE) connectors and one PCI Express (PCIe) x16 edge connector
- Four independent DDR4 SODIMM sockets (work with DDR4/QDR-II+/QDR-IV)
- 2.4" LCD touch module with 240(H) x 320 (V) pixel resolution LCD with 65K RGB color
- Single resistive touch
- 2x20 GPIO interface
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
- Touch & LCD Spec
- Drive up to 24 servo motors simultaneously
- MG996R Servo Motor is included
- Open source example is provided
- Omnivision 8 Mega Pixel Image sensor
- Voice Coil Motor (VCM) for focus control
- MIPI Decoder
- 2x20 GPIO to compatible with DE series FPGA Board
- 7" LCD, 800x480 Resolution, 24-bit Color
- Capacitive Touch, Multi-Touch Gesture Support, Single Touch Support
- 2x20 GPIO Interface, Compatible with DE2-115 / DE2 / DE3 /DE4
- Configurable digital interface to a processor—RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers
- Operates in the 70 MHz to 6.0 GHz range—covers most licensed and unlicensed bands
- Tunable Channel Bandwidth—<200 kHz to 56 MHz
- Complete dual- or single-channel integrated wideband transceiver on a single chip
- Wi-Fi, using ESP-WROOM-02 module
- Bluetooth SPP, using HC-05 module
- 9-axis sensor: accelerometer,gyroscope,magnetometer
- Ambient light sensor
- Humidity and temperature sensor
- UART to USB
- 2x6 TMD GPIO Header
- Intel® Agilex™ F-Series FPGA AGFB014R24B2E2V
- Two QSFPDD connectors for 200/100/40/25/10 GbE network interface
- Four independent DDR4 SODIMM sockets
- PCIe Gen4 x16
- Use Intel Cyclone SoC FPGA to control robot's balancing system
- Support ultrasonic obstacle avoidance, object following and gesture recognition
- Support mobile phone APP to remote control via Bluetooth protocal
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
After holding more than 10 years of InnovateAsia events, we’ve decided to take such interaction with our board users to the next level starting this year. This time, it will not be exclusive to academic end-user only, but open to all Altera FPGA board users. We would like to use YOUR designs and IP codes and implement it in our board design and applications. If you think you can master our project challenge and want to put this special experience on your portfolio, come and bid for the chance. A chance to show the world your capability and for your design to be used worldwide.