Terasic News Labs Our Company Products Turnkey Solutions Training FAQ
Cart
 
   
   

Adapters


Adapter DC 12V/2A ( for DE1-SoC/ DE2-115 / DE2-70 / C5G / NEEK in US)
  • 12V DC switching supply with 2A current
  • Input : AC 100~240V 50/60Hz
  • Output : DC 12V/2A
  • Size: 98.4*45*31.4 mm
  • Compatibility: DE1-SoC / DE2-115 / DE2-70 / C5GNEEK

Adapter DC 9V/1.3A (for DE2 in UK)
  • 9VDC switching supply with 1.3A current
  • Output: AC 100V~240V (50/60Hz)
  • Compatibility:DE2

Adapter DC 9V/1.3A (for DE2)
  • 9VDC switching supply with 1.3A current 
  • Input: AC 100~240V (50/60Hz)
  • Output: DC 9V/1.3A
  • Size: 60.2*44*26.2 mm
  • Compatibility: DE2

Adapter DC 7.5V/0.8A (for DE0 / DE1)
  • 7.5VDC switching supply with 0.8A current
  • Output: AC 100~240V (50/60Hz)
  • Input: DC 7.5V/0.8A
  • Size: 44*32*23.5 mm
  • Compatibility:  DE0 / DE1 / Cyclone II Starter Kit  

Adapter DC 9V/2.6A (for TREX-S2 Stratix II FPGA Prototyping System)

AC Power Cord (EURO)
  • Rating: 2.5A / 250V
  • Length: 1.8M
  • Convenient way to switch from US wall plugs to EURO wall plugs
  • Compatibility:  VEEK-MT-C5SoC / DE1-SoC / C5G

AC Power Cord (UK)
  • Rating: 3A / 250V
  • Length: 1.8M
  • Convenient way to switch from US wall plugs to UK wall plugs
  • Compatibility: DE2-70 / DE2-115NEEK   

Universal AC Adapter 250V/2.5A (Convert to EU)
  • 250V/16A
  • Convenient way to switch from US wall plugs to EU wall plugs
  • Simple snap-on design used with Terasic Technologies's switching power supplies
  • Compatibility: DE2-70 / DE2 / DE1 / Cyclone II Starter Kit / UBA / UBT

American AC power socket with UK plug adapter 250V / 5A
  • 250V / 5A
  • Convenient way to switch from US wall plugs to UK wall plugs
  • Simple snap-on design used with Terasic Technologies's switching power supplies
  • Compatibility: DE2-70 / DE2-115 / DE2 / DE1 / DE0   / NEEK   / Cyclone II Starter Kit   

Cables


PCIe x4 Gen.2 Cable
  • x4 PCIe  connector on both ends
  • Supports x4 PCIe data bus
  • Compatible with TR4 FPGA Development Kit
  • 1 meter (3.28 feet) / 2 meter (6.56 feet) /  3 meter (9.84 feet)

HSTC High Speed Cable
  • Spec: HSTC female connector at both ends
  • Size: 12 inches (304.80 mm)
  • Compatibility: Only for two DE3 board connection

 


HSMC High Speed Cable
  • Spec: HSMC male connector at both ends
  • Size: 12 inches (304.80 mm)
  • Compatibility: DE2-115, DE4 & Host boards which supporting HSMC-compliant connectors

USB Cable

RS232 Cable
  • Connector: DB9M/DB9F
  • Length: 1.8M
  • For serial communications
  • Compatibility: TREX-C1

Extras


USB Bluetooth Dongle
  • Bluetooth v 4.0+EDR
  • Class 1, wireless range of up to 50m
  • Compliant to DE10-Standard and DE10-Nano Linux BSP

USB WiFi Dongle
  • Type: Wireless Router 
  • WIFI Transmission Protocol: 802.11b/n/g 
  • WiFi 802.11 b/g/n
  • Transmission Rate: 150Mbps
  • Interace: USB 2.0

Battery for Terasic Spider
  • Rechargeable battery
  • Fully charged in 2 hours
  • Under constant operation, the battery charge will last approximately 30 minutes

HMF3C Height extension adapter card/ HMF3D Height extension adapter card
  • Compatibility: DE2-115, DE4, TR4, and other host boards which supporting HSMC-compliant connectors

THCB-HMF2 connector card

A 180-pin high speed connector which is gives users more flexibility when utilizing the interfaces of HSMC connector.


tPad Case
  • Form-fitting tPad/VEEK-MT/VEEK-MT2 dimensions. 
  • Shock-absorbing and water-proof fabric exterior
  • Front pocket for pens, memory cards, cellphones, etc.

HSMC Debug & Loopback Connector Package

This package consists of HSMC adapters that are intended for testing and debugging purposes over the High-Speed Mezzanine card (HSMC). The package includes two loopback high-speed mezzanine connector (HSMC) cards and a debug HSMC card which can be connected to any HSMC interface.

  • Compatibility: Any HSMC-based host board

 


HSMC Flex Cable - Special Accessory of NEEK Upgrade Kit

HSMC Flex Cable is equipped with two 160-pin HSMC connectors, one male and female each. It allows user to connect 2 HSMC-interfaced boards together. For example, a Cyclone III Starter Kit is connected to NEEK Upgrade Kit in a brick form by this cable. 


16X2 LCD Module (No Backlight)

2nd CMOS Camera Lens Module (for DC2)
  • 1.3 Mega Pixel
  • Compatibility: DC2

Accessory Package (for DE2-70/DE2-DE1/CSK)
  • Including six silicon footstands
  • Including two cables(black- and red-colored)
  • two pins to be used together for testing FPGA boards
  • Compatibility: DE2-70 / DE2 / DE1 / Cyclone II Starter Kit
Terasic News Labs | Our Company | Products | Turnkey Solutions | Training | FAQ | Contact Us | Forum | Facebook | YouTube