• Support 12G/6G/3G/HD/SD-SDI standard
• AES Audio inputs and outputs.
• Video and Image Processing Applications

• HDMI 1.4a Compliant 
• 3D format Support 
• High Bitrate Audio Support 
• 4Kx2K@30Hz Support

• 7" 800x480 LCD module with 5-point touch
• 8Mega Pixel  Color Camera
• Light Sensor, Acceleromter, Gyroscope, Magnetometer

• Support HSMC interface
• Dual HDMI receiver port
• Video and Image Processing applications

• Support HSMC interface
• HDMI transmitter
• Video and Image Processing applications

• Support HSTC interface only
• HDMI transmitter & receiver port
• Video and Image Processing applications

• Support 3G/HD/SD-SDI standard
• SDI and AES inputs and outputs.
• Video and Image Processing Applications

Terasic’s SoC FMC Daughter Card is an extension and evaluation platform that provides cost-effective extension opportunity and effortless prototyping/evaluation for our clients’ to simplify the system design.

• Convert FMC+ transceiver channels to PCIe x16 Edge.
• Support up to PCIe Gen4 x16
• Support FMCC+ VADJ 1.2V/1.5V/1.8V/2.5V/3.0V

• VITA 57.4 FMC+ or Vita57.1 FMC form factor
• Mates with HPC or LPC carrier boards
• Ultra-Low Jitter Clock Multiplier for clock testing

• Compatible with FMC interface
• Four 40-pin expansion headers
• 2x6 TMD header and SMA/Button/Switch/LED

• Transceiver channels to SMA connectors
• Support 4 transceiver channels
• FMC interface

• Four ADC Channels
• ADC Chip AD9648BCPZ-125, 14-bits, 125 MSPS
• FMC Interfaced

• Drive up to 24 servo motors simultaneously 
• MG996R Servo Motor is included
• Open source example is provided

• Up to 8.0Gbps PCIe 3.0 Serial ReDriver
• PCIe x4 Gen 3
• Adjustable receiver equalization
• Adjustable transmitter amplitude and de-emphasis

• 4 single lane channel SATA/SAS interface
• Integrated SATA/SAS 4 channel lane connector
• Storage Applications

• Transceiver channels to SMA connectors
• Support 4 transceiver channels
• SMA connectors for PLL

• Two 14-bit AD and DA converters
• AD and DA up to 150MSPS and 250MSPS
• DSP Applications

• Support HSMC or GPIO interface
• Two 14-bit AD/DA converters
• DSP Applications

• Compatible with HSMC interface
• Three 40-pin expansion headers
• Test points for signal measurement

• Support 12G/6G/3G/HD/SD-SDI standard
• AES Audio inputs and outputs.
• Video and Image Processing Applications

• Omnivision 8 Mega Pixel Image sensor
• Voice Coil Motor (VCM) for focus control
• MIPI Decoder
• HDMI TX
• FMC Interface

• Omnivision 8 Mega Pixel Image sensor
• Voice Coil Motor (VCM) for focus control
• MIPI Decoder
• 2x20 GPIO to compatible with DE series FPGA Board

• 7" LCD, 800x480 Resolution,  24-bit Color
• Capacitive Touch, Multi-Touch Gesture Support, Single Touch Support
• 2x20 GPIO Interface, Compatible with DE2-115 / DE2 / DE3 /DE4

• Interfaces Aptina standard parallel socket with Altera HSMC connector
• Compatible with many Altera FPGA boards (DE2-115, DE3, DE4, etc.)
• Supports a wide array of Aptina Sensors

• Support of standard Camera Link modes (base, medium, dual base assembly)
• Serial Communication with camera
• Simple interface
• Automatic detection by hardware / software
• Two LVDS 28-bit channel link chip (DS90CR288A)

• Support HSMC interface
• Dual HDMI receiver port
• Video and Image Processing applications

• Support HSMC interface
• HDMI transmitter
• Video and Image Processing applications

• 2.4" LCD touch module with 240(H) x 320 (V) pixel resolution LCD with 65K RGB color
• Single resistive touch
• 2x20 GPIO interface

• Support UXGA resolution
• DVI transmitter/receiver
• Video/Image Processing

• Support HSTC interface only
• HDMI transmitter & receiver port
• Video and Image Processing applications

• Support 3G/HD/SD-SDI standard
• SDI and AES inputs and outputs.
• Video and Image Processing Applications

• One FMC connector for interface conversion, host boards supporting FMC(HPC)-compliant connector can work with this daughter card.
• Four-Port Integrated 10/100/1000 Gigabit Ethernet transceiver Supports SGMII/GMII/MII/RGMII MAC interfaces for direct connection to a MAC/Switch port
• Dynamically configurable to support 10Mbps, 100Mbps (Fast Ethernet) or 1000Mbps (Gigabit Ethernet) operation
• Uses standard Cat 5 UTP (unshielded twisted pair) cabling
• Requires a 25-MHz reference clock driven from a dedicated oscillator
• Complete Reference Design 

• Two independent XAUI interfaces from the HSMC to the BCM8727
• Two independent SFI interfaces from the BCM8727 to SFP⁺ cages
• MDIO interfaces
• I2C EEPROM for HSMC identification and user data
• Si5334C clock generator
• 156.25MHz reference available on SMA connectors and through the HSMC connector
• 4 user bi-color LEDS for each channel (8 total bi-color LEDs)

• High-Speed Mezzanine Card (HSMC) connector for interface conversion
• Two CAN DB9 connector
• Two RS-485 DB9 connector
• RS-232 DB9 connector

• RGMII Ethernet PHY, RJ-45 connector
• USB 2.0 OTG PHY with ULPI
• RS-485 x2 with 2x5 0.1* header
• CAN x2 with DB9 connector
• GPIO with 2x3 0.1* connector

• 4 single lane channel SATA/SAS interface
• Integrated SATA/SAS 4 channel lane connector
• Storage Applications

• Duel-Port Gigabit Ethernet transceiver
• Gigabit Ethernet Applications
• Reference design with source code

• 4 Transceiver and LVDS based channels
• SONET, Fiber Channel, Ethernet
• Communication Applications

• Four ADC Channels
• ADC Chip AD9648BCPZ-125, 14-bits, 125 MSPS
• FMC Interfaced

• Two 14-bit AD and DA converters
• AD and DA up to 150MSPS and 250MSPS
• DSP Applications

• Support HSMC or GPIO interface
• Two 14-bit AD/DA converters
• DSP Applications

• Two motor axes, each with three-phase MOSFET power stages operating up to 125 kHz
• Input voltage range 9 to 16 V DC
• DC link voltage of 12 to 48 V from DC-DC boost-buck converter
• Enpirion^® switch mode power supplies for logic, position sensors, MOSFET gate drives and regulated 12 V output
• Sigma-delta ADCs for sensing voltages and currents
• Direct analog connection to suitable development kits such as the MAX^® 10M50 Development Kit
• Sensed motor phase currents and voltages to enable sensorless control
• Position feedback interfaces for each axis

• Drive up to 24 servo motors simultaneously 
• MG996R Servo Motor is included
• Open source example is provided

• Wi-Fi, using ESP32-WROOM-32E module
• Classic Bluetooth (BT) and Bluetooth Low Energy(BLE), using ESP32-WROOM-32E module
• 9-axis sensor: accelerometer,gyroscope,magnetometer
• Ambient light sensor
• Humidity and temperature sensor
• UART to USB
• 2x6 TMD GPIO Header

• Fully qualified Bluetooth^® version 2.1 module, supports version 2.1 + Enhanced Data Rate (EDR)
• Backwards-compatible with Bluetooth version 2.0, 1.2, and 1.1
• Low power (26 uA sleep, 3 mA connected, 30 mA transmit)

• Configurable digital interface to a processor—RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers
• Operates in the 70 MHz to 6.0 GHz range—covers most licensed and unlicensed bands
• Tunable Channel Bandwidth—<200 kHz to 56 MHz
• Complete dual- or single-channel integrated wideband transceiver on a single chip

• VITA 57.4 FMC+ or Vita57.1 FMC form factor
• Mates with HPC or LPC carrier boards
• Ultra-Low Jitter Clock Multiplier for clock testing

This package consists of HSMC adapters that are intended for testing and debugging purposes over the High-Speed Mezzanine card (HSMC). The package includes two loopback high-speed mezzanine connector (HSMC) cards and a debug HSMC card which can be connected to any HSMC interface.

• Compatibility: Any HSMC-based host board