• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 SDRAM (32-bit data bus)(HPS)
• Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 and 64MB SDRAM
• VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

• Support HSMC or GPIO interface
• Two 14-bit AD/DA converters
• DSP Applications

• Two 14-bit AD and DA converters
• AD and DA up to 150MSPS and 250MSPS
• DSP Applications

• Cyclone IV EP4CE115 with ~114,480 LEs
• 2 Gigabit Ethernet Ports, HSMC connector
• 128MB SDRAM, 2MB SRAM, 8MB Flash

• MAX 10 10M50DAF484C7G Device
• Accelerometer and 4-bit Resistor VGA 
• 64MB SDRAM, x16 bits data bus
• Arduino UNO R3 and 2x20 GPIO connector
• On-Board USB Blaster (Normal type B USB)

• Cyclone III EP3C16F484 with ~16,000 LEs
• 8MB SDRAM and 4MB Flash
• USB Blaster onboard

• Support UXGA resolution
• DVI transmitter/receiver
• Video/Image Processing

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 SDRAM (32-bit data bus)(HPS)
• Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

• Cyclone II EP2C20F484 with ~20,000 LEs
• 8MB SDRAM, 512K SRAM, and 4MB Flash
• Audio/Video interface, RS232, and SD card
• Also known as Cyclone II Starter Kit

• Cyclone II EP2C35F672 with ~35,000 LEs
• 8MB SDRAM, 512K SRAM, and 4MB Flash
• TV decoder, Ethernet, RS232, and USB Host/Device

• Cyclone V GX 5CGXFC5C6F27C7N  Device
• LPDDR2, SRAM, FLASH EPCQ256
• Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX

• Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
• 2GB DDR3, 128MB QSPI Flash, EPCQ256
• SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
• HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
• Support Linux BSP and openCL BSP

• Stratix III EP3SL150 F1152
• DDR2 SO-DIMM and USB Device/Host
• Large ASIC Prototyping Applications

• Cyclone V 5CEBA4F23C7N Device
• 4-bit Resistor VGA
• Provides SPI and 4-bit SD mode for SD Card access
• Serial Configuration device – EPCS64
• 64MB SDRAM, x16 bits data bus
• On-Board USB Blaster (Normal type B USB)

• MAX II EPM2210F324C3
• Largest CPLD in MAX II series
• USB Blaster onboard 

‧ Compatible with Altera USB Blaster
‧ Support JTAG Voltage: 1.2V~3.3V (Rev B Only)
‧ Better anti-noise capabilities
‧ The same circuit is used in Altera DE2 Board designed/manufactured by Terasic

• Stratix IV GX EP4SGX230/EP4SGX530 with transceivers
• PCIe x8 Connector and 2 DDR2 SO-DIMM
• High-Performance and Bandwidth Applications

• Cyclone II EP2C70F896 with ~70,000 LEs 
• 64MB SDRAM x2, 2MB SSRAM, and 8MB Flash
• Multimedia interface with dual TV decoder