Terasic News Labs Our Company Products Turnkey Solutions Training FAQ
Cart
 
   
   
Don't know which board fits your needs ?
Check out this board guide to compare products side to side!

Stratix V


Terasic TR5 FPGA Development Kit
  • Stratix V GX 5SGXEA7N2F45C2N
  • DDR3 SO-DIMM and FMC x4 Connectors
  • Large ASIC Prototyping Applications

TR5-F40W
  • Altera Stratix® V GX FPGA (5SGXEA3K2F40C3)
  • On-Board USB Blaster II or JTAG header for FPGA programming
  • Fast passive parallel (FPPx32) configuration via MAX II CPLD and flash memory
  • SSRAM, FLASH

TR5-Lite
  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • Two SFP+ connectors, One Serial ATA (SATA II) host port
  • DDR3 SDRAM, ISSI, FLASH

DE5-Net FPGA Development Kit
  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • 32MB SRAM (ISSI QUADP for DE5-Net 450,  GSI SigmaQuad-II+ for DE5-Net 550, Cypress QDRII+ for DE5-Net 500)
  • Up to 8GB DDR3 800 MHz SO-DIMM SDRAM

Altera DSP Development Kit, Stratix V Edition
  • Stratix V GS FPGA: 5SGSMD5K2F40C2N
  • DDR3 SDRAM, QDR II+ SRAM, RLDRAM II
  • PCIe x8, QSFP, Gigabit Ethernet, SDI, HSMC

Altera Stratix V GX FPGA Development Kit
  • Stratix V GX FPGA 5SGXEA7K2F40C2N
  • DDR3 SDRAM, QDR II+ SRAM, RLDRAM II
  • PCIe x8, HSMC, SDI, QSFP, Gigabit Ethernet

Altera Stratix V Advanced Systems Development Kit
  • 2 Stratix V GX FPGA 5SGXEA7N2F45C2N
  • DDR3 SDRAM, QDR II+ SRAM, SRAM, flash
  • PCIe x16, FMC connector, HSMC port

Altera Transceiver Signal Integrity Development Kit, Stratix V GX Edition
  • Stratix V GX FPGA 5SGXEA7N2F40C2N
  • Configuration flash
  • 28 full-duplex transceiver channels

Altera Transceiver Signal Integrity Development Kit, Stratix V GT Edition
  • Stratix V GT 5SGTMC7K3F40C2N
  • Configuration flash
  • 32 full-duplex GXB transceiver channels (up to 28.05 Gbps), Gigabit Ethernet

Altera 100G Development Kit, Stratix V GX Edition
  • Featured device: 5SGXEA7N2F45C2N
  • DDR3 SDRAM, QDR II
  • QSFP, SFP+, SMA, CFP, Interlaken interface, Gigabit Ethernet

Stratix IV


Terasic TR4 FPGA Development Kit
  • Stratix IV GX EP4SGX230/EP4SGX530 with High Speed Transceivers
  • 2 PCIe x4 Connectors and DDR3 SO-DIMM Slot
  • Stackable Design for Multi-FPGA System

Altera DE4 Development and Education Board
  • Stratix IV GX EP4SGX230/EP4SGX530 with transceivers
  • PCIe x8 Connector and 2 DDR2 SO-DIMM
  • High-Performance and Bandwidth Applications

Altera Stratix IV GX FPGA Development Kit
  • Stratix IV GX EP4SGX230KF40C2N FPGA
  • DDR3 SDRAM, QDR II+ SRAM, flash, SSRAM
  • PCIe x8, Gigabit Ethernet, HSMC, HDMI, 3G-SDI

Stratix III


Altera DE3 Development System
  • Stratix III EP3SL150 F1152
  • DDR2 SO-DIMM and USB Device/Host
  • Large ASIC Prototyping Applications

Arria 10


Arria® 10 GX Transceiver Signal Integrity Development Kit
  • Intel Arria 10 GX 10AX115S2F45I1SG FPGA
  • Six full-duplex transceiver channels with 2.4 mm SMA connectors
  • Transceiver channels to Amphenol Xcede+ backplane connector, QSFP+,CFP2 and SFP+ optical interface

Arria 10 GX FPGA Development Kit
  • Arria 10 GX FPGA (10AX115S2F45I1SG)
  • 1 GB DDR4 SDRAM, 2GB DDR3 SDRAM, and RLDRAM3 (16 Meg x 36) daughtercards
  • One QSFP and one SFP+ connectors, one PCI Express (PCIe) x8 edge connector
  • Two FMC low-pin count (LPC + 15 transceivers) connector

TR10a-HL Arria 10 FPGA Development Kit
  • Arria 10 GX FPGA (10AX115N3F45E1)
  • Half-length PCIe Gen3 x8 board
  • Four QSFP+ connectors 
  • Six independent 550MHz QDRII+ SRAMs

DE5a-Net-DDR4
  • Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR4 SODIMM socket and four independent 550MHz QDRII+ SRAMs

Arria 10 SoC Development Kit
  • Evaluate Arria 10 SoC device features and performance
  • Begin development of your hardware and software design
  • Use as a platform for target reference designs, OS/BSP, and tools

DE5a-Net Arria 10 FPGA Development Kit
  • Altera Arria 10 GX FPGA (10AX115N3F45)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR3 SODIMM socket and four independent 550MHz QDRII+ SRAMs

Arria V


Arria V SoC Development Kit and SoC Embedded Design Suite
  • Arria V ST SoC—5ASTFD5K3F40I3NES (SoC)
  • MAX® V CPLD—5M2210ZF256C4N (system controller)
  • MAX II CPLD—EPM570GF100 (embedded USB-BlasterTM II cable)

Altera Arria V GX Starter Kit
  • Arria V GX 5AGXFB3H4F35C5NES
  • HDMI 1.3 TX, SDI 3G, Ethernet
  • DDR3 SDRAM, SSRAM

Altera Arria V GT FPGA Development Kit
  •  2 * Arria V GT FPGA 5AGTD7K3F40I3N
  • DDR3 SDRAM, QDR II+ SRAM, flash
  • HSMC, FMC, PCIe x8, SFP+, SDI

Arria II


Arria II GX Video Development System
  • Arria II GX EP2AGX125 with transceivers
  • 128MB DDR3 device, DDR2 SO-DIMM, 2MB SSRAM, 64MB FLASH
  • Gigabit Ethernet, PCIe x8 Connector

Cyclone 10


Intel® Cyclone® 10 LP FPGA Evaluation Kit
  • Intel® Cyclone® 10 LP FPGA (10CL025, U256 package)
  • 128Mb HyperRAM and  64Mb EPCQ Flash
  • Gigabit Ethernet port,  2x20 GPIO Expansion Header , Pmod compatible connector and  Arduino UNO R3 type connectors

Cyclone V


ADC-SoC
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • On-board two high speed A/D conveters
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

VEEK-MT2S
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
  • 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror

DE10-Standard
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
  • HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
  • Support Linux BSP and openCL BSP

VEEK-MT2-C5SoC
  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • 8-Megapixel Digital Image Sensor Module with auto focus
  • 7" LCD Touch Screen Module with 5 point touch
  • Accelerometer, Gyroscope, Magnetometer, Ambient Sensor

DE10-Nano Kit
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

DE0-Nano-SoC Kit/Atlas-SoC Kit
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

DE0-CV Board
  • Cyclone V 5CEBA4F23C7N Device
  • 4-bit Resistor VGA
  • Provides SPI and 4-bit SD mode for SD Card access
  • Serial Configuration device – EPCS64
  • 64MB SDRAM, x16 bits data bus
  • On-Board USB Blaster (Normal type B USB)

DE1-SoC-MTL2
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
  • Touch & LCD Spec

DE1-SoC Board
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

SoCKit - the Development Kit for New SoC Device
  • Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
  • 2GB DDR3, 128MB QSPI Flash, EPCQ256
  • SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC

Cyclone V GX Starter Kit
  • Cyclone V GX 5CGXFC5C6F27C7N  Device
  • LPDDR2, SRAM, FLASH EPCQ256
  • Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX

Cyclone V SoC Development Kit and SoC Embedded Design Suite
  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • Hard processor system (HPS)
  • DDR3, QSPI Flash, Micro-SD Card

Cyclone V GT FPGA Development Kit
  • FPGA prototyping
  • FPGA power measurement
  • Transceiver I/O performance up to 5.0 Gbps
  • PCI Express® (PCIe® ) Gen2 x4 (at 5.0 Gbps per lane)
  • Endpoint or rootport support

Altera Cyclone V E FPGA Development Kit
  • Cyclone V E FPGA - 5CEFA7F31C7NES
  • DDR3 x32 at 300 MHz (soft memory controller)
  • On-board USB-BlasterTM II cable (USB, PHY, Max® V CPLD)

Cyclone IV


The Video and Embedded Evaluation Kit - Multi-touch, Second Edition (VEEK-MT2)
  • Cyclone IV EP4CE115 with ~114,480 LEs
  • 8-Megapixel Digital Image Sensor Module
  • 7" LCD Touch Screen Module

DE2i-150 FPGA Development Kit
  • Cyclone IV GXP4CGX150F31 device
  • Intel® Atom™ Dual Core Processor N2600( 1M Cache, 1.6GHz )
  • Supports Windows & Linux Operation Systems

Altera DE2-115 Development and Education Board
  • Cyclone IV EP4CE115 with ~114,480 LEs
  • 2 Gigabit Ethernet Ports, HSMC connector
  • 128MB SDRAM, 2MB SRAM, 8MB Flash

DE0-Nano Development and Education Board
  • Ideal for use with embedded soft processors
  • Tiny and robust packaging for portable applications
  • Expansion headers for daughter cards, motors, actuators, etc.

Altera Cyclone IV GX Transceiver Starter Kit
  • Cyclone IV GX EP4CGX15BF14C8N FPGA
  • flash, SRAM
  • PCIe x 1, Gigabit Ethernet

Altera Cyclone IV GX FPGA Development Kit
  • Cyclone IV GX EP4CGX150N FPGA
  • DDR2 SDRAM, SSRAM, flash
  • PCIe x4, Gigabit Ethernet, HSMC

Cyclone III


Altera DE0 Board
  • Cyclone III EP3C16F484 with ~16,000 LEs
  • 8MB SDRAM and 4MB Flash
  • USB Blaster onboard

Altera Cyclone III FPGA Development Kit
  • Cyclone III EP3C120F780 FPGA
  • DDR2, SRAM, Flash
  • Gigabit Ethernet, Graphics LCD, HSMC, USB

Cyclone II


Altera DE2 Board
  • Cyclone II EP2C35F672 with ~35,000 LEs
  • 8MB SDRAM, 512K SRAM, and 4MB Flash
  • TV decoder, Ethernet, RS232, and USB Host/Device

Altera DE1 Board
  • Cyclone II EP2C20F484 with ~20,000 LEs
  • 8MB SDRAM, 512K SRAM, and 4MB Flash
  • Audio/Video interface, RS232, and SD card
  • Also known as Cyclone II Starter Kit

MAX 10


DE10-Lite Board
  • MAX 10 10M50DAF484C7G Device
  • Accelerometer and 4-bit Resistor VGA 
  • 64MB SDRAM, x16 bits data bus
  • Arduino UNO R3 and 2x20 GPIO connector
  • On-Board USB Blaster (Normal type B USB)

MAX 10 FPGA Development Kit
  • Develop designs for the 10M50D, F484 package FPGA
  • Measure the performance of the MAX 10 FPGA analog-to-digital block conversion
  • Interface MAX 10 FPGAs to DDR3 memory at 300 MHz performance
  • Run embedded Linux using the Nios® II processor

Altera MAX 10 FPGA Evaluation Kit
  • 10M08SAE144C8G
  • Arduino shield expansion
  • Access to 80 I/O through-holes
  • Prototype area

MAX 10 NEEK
  • MAX 10 10M50DAF484C6G with 50K LEs
  • DDR3 with ECC, QSPI Flash, MicroSD Card
  • Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC
  • 8-Mega pixel color camera and 7" 5-point touch screen
Terasic News Labs | Our Company | Products | Turnkey Solutions | Training | FAQ | Contact Us | Forum | Facebook | YouTube