- Support 12G/6G/3G/HD/SD-SDI standard
- AES Audio inputs and outputs.
- Video and Image Processing Applications
- Arria 10 SoC with Dual-core ARM Cortex-A9
- DDR4, HDMI, FMC, PCIe, SATA, Ethernet, Flash, USB, etc.
- Type-C USB 3.1 Gen1 and DisplayPort Altenate Mode
- Support Linux BSP
- Intel Agilex® SoC Standalone Module with onboard USB-Blaster II
- FMC+ and FMC connectors for expansion
- Support two independent 32GB DDR4 with ECC and one on-board QSFP28 connector
- Ideal for Prototyping, Industrial Control System
- Stratix V GX 5SGXEA7N2F45C2N
- DDR3 SO-DIMM and FMC x4 Connectors
- Large ASIC Prototyping Applications
- VITA 57.4 FMC+ or Vita57.1 FMC form factor
- Mates with HPC or LPC carrier boards
- Ultra-Low Jitter Clock Multiplier for clock testing
- Omnivision 8 Mega Pixel Image sensor
- Voice Coil Motor (VCM) for focus control
- MIPI Decoder
- HDMI TX
- FMC Interface
- One FMC connector for interface conversion, host boards supporting FMC(HPC)-compliant connector can work with this daughter card.
- Four-Port Integrated 10/100/1000 Gigabit Ethernet transceiver Supports SGMII/GMII/MII/RGMII MAC interfaces for direct connection to a MAC/Switch port
- Dynamically configurable to support 10Mbps, 100Mbps (Fast Ethernet) or 1000Mbps (Gigabit Ethernet) operation
- Uses standard Cat 5 UTP (unshielded twisted pair) cabling
- Requires a 25-MHz reference clock driven from a dedicated oscillator
- Complete Reference Design
- Intel Stratix 10 SoC Standalone Module with onboard USB-Blaster II
- FMC+ and FMC connectors for expansion
- Support two independent 32GB DDR4 with ECC.
- Ideal for Prototyping, Industrial Control System, Military and Aerospace
- 2 * Arria V GT FPGA 5AGTD7K3F40I3N
- DDR3 SDRAM, QDR II+ SRAM, flash
- HSMC, FMC, PCIe x8, SFP+, SDI
- Arria 10 GX FPGA （10AX115S2F45I1SG）
- 1 GB DDR4 SDRAM, 2GB DDR3 SDRAM, and RLDRAM3 (16 Meg x 36) daughtercards
- One QSFP and one SFP+ connectors, one PCI Express (PCIe) x8 edge connector
- Two FMC low-pin count (LPC + 15 transceivers) connector
- 2 Stratix V GX FPGA 5SGXEA7N2F45C2N
- DDR3 SDRAM, QDR II+ SRAM, SRAM, flash
- PCIe x16, FMC connector, HSMC port
- Intel Agilex 7 SoC FPGA F-series AGFB027R24C2E2V
- QSFP28 port and FMC+ expansion connector
- Two independent DDR4 banks
- HPS system includes pheriperal DDR4, SD card, UART and Ethernet
- PCIe Gen4 x8
- Compatible with FMC interface
- Four 40-pin expansion headers
- 2x6 TMD header and SMA/Button/Switch/LED
- 1SX280HU2F50 Intel® Stratix® 10 SoC FPGA
- One HiLo DDR4 memory card (4GB)
- One DDR4 SODIMM memory card (16GB dual rank)
- Two HPS peripheral daughter cards (OOBE and NAND)
- Two FMC loopback cards supporting transceiver, LVDS and single-ended I/Os
- Two quad small-form-factor pluggable (QSFP28) and one SFP+ port
- Two FMC+ low-pin count (LPC + 15 transceivers) connector
- One SFP+ interface
- PCIe x16 edge connector (via cable - not included)
- Intel® Agilex® 5 E-Series with 656K LEs and HPS includes Dual Core A55 + Dual Core A76
- HPC FMC+, 2x20 GPIO and 2x6 TMD connector (one each for expansion)
- One 2.5 G Ethernet, HDMI output, two 2-lane MIPI, one QSFP+ and PCIe cabling Gen 3 x4 socket
Terasic’s SoC FMC Daughter Card is an extension and evaluation platform that provides cost-effective extension opportunity and effortless prototyping/evaluation for our clients’ to simplify the system design.
- Develop and test PCI Express® (PCIe® ) 3.0 designs using the PCI-SIG® -compliant development board.
- Develop and test memory subsystems consisting of DDR4, DDR3, QDR IV, and RLDRAM III memories.
- Develop modular and scalable designs by using the FPGA mezzanine card (FMC) connectors to interface to a FMC mezzanine card provided by Altera partners and supporting protocols, such as JESD204B, Serial RapidIO® , 10 Gbps Ethernet (10GbE), SONET, Common Public Radio Interface (CPRI),OBSAI, and many others.